Disk Drive Operations
How to Autoload a File
Turn the knob until the filename you want to autoload is scrolled into
5
the filename parameter field.
Press the
arrow
keys to move the cursor to the Execute field, then
6
press the
Select
key.
An autoload file is created and placed at the top of the list of files. The file
description contains the filename to be autoloaded and indicates whether or
not the Autoload operation is enabled.
Autoload Filename Field
It should be noted that Autoload loads all of the files for a given filename. If
you want to load only the file for a type, rename that file to separate it from
the other files and enable it as the current Autoload file.
As long as Autoload is enabled before the instrument is shut off, Autoload will
remain enabled when you powerup the instrument and load the configuration
files.
6–18
Filename
parameter field