The Format Menu
The Format menu is where you assign which data channels are
measured and what acquisition mode is used to capture valid data.
The configuration of the Format menu consists of grouping and
labeling the data channels from the system under test to fit your
particular measurement. For your convenience in recognizing bit
groupings, you can specify symbols to represent them.
If the analyzer is configured as a State analyzer, there are master and
slave clocks, clock qualifiers and a variable clock setup and hold to
further qualify what data is captured.
Format Menu Map
The following menu map graphically illustrates all fields in the Format
menu. Use the menu map as an overview and as a quick reference to
the available options in the Format menu.
11–2