Table of Contents
Advertisement
Advisory Messages
Computing chart information. Please Wait. This message is
displayed when the analyzer is busy computing the data to be charted.
When the computing is finished, the new chart will be displayed.
Slow or missing clock. This message indicates a slow or missing clock.
This is displayed for a state analyzer only until the first clock occurs.
Occurrences Remaining in Level "n". The analyzer is waiting for the
specified level to be satified. This advisory is used in analyzers that use
the Occurs parameter.
Waiting in Level "n". The analyzer is waiting for the specified level to
be satified. This advisory is used in analyzers that use the > or <
parameter.
Filling Memory after Trigger. This message is displayed for a
transitional timing analyzer that has triggered but has not yet finished
storing data. This message is also displayed for a conventional timing
analyzer with a very slow sample rate.
"n.nnn" s remaining to delay. This advisory is displayed for a
conventional/glitch timing analyzer that is doing a long hardware delay
(after trigger and during the delay).
Trigger inhibited during timing prestore. This message is displayed
while timing analyzer is waiting to satisfy prestore requirements
Storing transitions after trigger for pod "n". This message is
displayed for transitional timing analyzer that has triggered, but has not
finished storing data.
Trigger ocurred before prestore completed. This message is
displayed for a state analyzer while in manual acquisition mode, that has
not acquired the requested number of states prior to trigger.
18–8
Advertisement
Table of Contents
