The RS-232C, GPIB, and Centronix Interface
The Controller Interface
The instrument is equipped with a standard RS-232C interface and an
GPIB interface that allow you to connect to a controller (GPIB and
RS-232C optional on the 1664A). Either interface gives you remote
access for running measurements, for up-loading and down-loading
configurations and data, and more.
The Printer Interface
The instrument can output its screen display to various GPIB,
RS-232C, and Centronix (1664A only) graphics printers. Configured
menus as well as waveforms and other data can be printed for
complete measurement documentation.
See Also
"Connecting a Printer" for more details.
Agilent Technologies 1660A Series Logic Analyzers Programming
Manual for more information on the controller interface.
7–7