Accessories Available - Agilent Technologies 1660A Series User Reference

50/100-mhz state, 500-mhz timing logic analyzers
Table of Contents

Advertisement

Accessories Available

There are a number of accessories available that will make your measurement
tasks easier and more accurate. You will find these listed in Accessories for
Agilent Logic Analyzers. The table below lists additional documentation
that is available from your nearest Agilent Technologies sales office for use
with your logic analyzer.
Accessories Available
Quick Start Training Kit
Programming Reference
Service Guide
* Standard equipment for all models except the 1664A. Items can be ordered as an option for the
1664A.
Preprocessor Modules
The preprocessor module accessories enable you to quickly and easily
connect the logic analyzer to your microprocessor under test.
Included with each preprocessor module is a 3.5-inch disk which contains a
configuration file and an inverse assembler file. When you load the
configuration file, it configures the logic analyzer for making state
measurements on the microprocessor for which the preprocessor is designed.
Configuration files from other analyzers can also be loaded. For information
on translating other configuration files into the analyzer, refer to the
applicable preprocessor manual.
The inverse assembler file is a software routine that will display captured
information in a specific microprocessor's mnemonics. The DATA field in the
State Listing is replaced with an inverse assembly field. The inverse
assembler software is designed to provide a display that closely resembles
the original assembly language listing of the microprocessor's software. It also
identifies the microprocessor bus cycles captured, such as Memory Read,
Interrupt Acknowledge, or I/O Write.
Many of the preprocessor modules require the Agilent Technologies 10269C
General-Purpose Probe Interface. The probe interface accepts the specific
preprocessor PC board and connects it to five connectors on the
general-purpose interface to which the logic analyzer probe cables connect.
Introduction
Accessories Available
Quantity
1*
1*
1
1–9

Advertisement

Table of Contents
loading

This manual is also suitable for:

1660a1661a1662a1663a1664a1663as

Table of Contents