Table of Contents
Advertisement
Statistics Markers
After patterns are assigned to the X and O markers, statistical
information is available when markers are set to Statistics. The logic
analyzer displays the following information:
•
Number of valid runs (runs where Pattern markers were able to be
placed on specified patterns).
•
Minimum time between the X and O Pattern markers.
•
Maximum time between the X and O Pattern markers.
•
Average time between the X and O Pattern markers.
Statistics markers only become available when the Count field in the
Trigger menu is set to Time.
The markers are graphically displayed by dashed vertical lines. In
addition, both markers are labeled at the bottom of the display.
16–25
Advertisement
Table of Contents
