Using the Front-Panel Interface
How to Power-up The Analyzer
How to Power-up The Analyzer
The method for powering up the analyzer is dependent on the model.
For the 1660A through 1663A, simply set the front panel LINE switch to ON.
Power On Procedure
For the 1664A, proceed as follows:
Insert the Operating System disk into the disk drive.
1
Set the front panel LINE switch to ON.
2
Verify "Loading System File" is displayed. If "System Disk Not
3
Found" is displayed, repeat procedure using the correct Operating
System disk.
N O T E
It is recommended that a working copy of the master Operating System disk
be made (using the "Duplicate Disk" function in the System Menu) and used
for normal operation. Place the master Operating System disk in a safe
location, for use when the working copy is damaged or lost.
3–10