Table of Contents
Advertisement
The Waveform Menu
Marker Label / Base and Display
Statistics are based on the time between the X and O. Both markers
must be found before valid statistical information in displayed.
In repetitive run mode, the display is updated each time a valid run
occurs until you press Stop. If you press Run after Stop, the statistics
continue to update without loss of information.
In single run mode, each time you press Run an additional valid run
will be added to the data and the statistics will be updated. This
process continues unless you change the placement of the X and O
Pattern markers between runs.
Reset Statistics
All statistical information can be cleared at any time by selecting the
Reset Statistics field. Statistics are also cleared any time the patterns
assigned to the X and O markers are changed.
Statistics Display
14–30
Reset statistics
field
Advertisement
Table of Contents
