Table of Contents
Advertisement
Label / Base Roll Field
When the number of assigned labels becomes greater than the total number
of labels that can be displayed on screen, the analyzer will store them off
screen. If there are offscreen labels, the Label/Base roll field turns dark.
To roll label and base fields onto the screen, activate the roll function by
selecting the dark Label/Base roll field. When the Label/Base roll field is
selected, it turns light and the roll indicator appears in the field as shown.
Once the roll indicator appears, rolling is then done by turning the knob.
If there is more than one rollable field, the roll indicator remains with the last
rollable field activated. For example, the Listing menu shown below has both
the Label/Base field and the state location field, which are both rollable.
However, the only field that rolls when turning the knob is the field with the
roll indicator.
The Page keys roll data one screen at a time. The data type and direction is
determined by which page key is pressed. Rolling data with the Page key
works independent of the knob rolling function.
Label and base field
State location field
with roll indicator
Label and Base Roll Field
The Common Menu Fields
Label / Base Roll Field
9–13
Advertisement
Table of Contents
