Pattern Markers
When Pattern is selected from the markers type selection menu, two
markers labeled X and O become available. Pattern markers identify
and mark unique bit patterns in the data listing. Once the unique bit
patterns are marked, they can be used as reference points or as
criteria for a stop measurement.
The markers are graphically displayed by dashed vertical lines. In
addition, both markers are labeled at the bottom of the display.
When a marker is positioned in the Listing menu, it is also positioned
in the Chart menu and Waveform menu.
See Also
"Specify Patterns Field" found later in this chapter for more information on
creating a pattern for the X and O markers.
16–12