Pattern Markers - Agilent Technologies 1660A Series User Reference

Pattern Markers

When Pattern markers are selected, two markers labeled X and O
become available. Pattern markers identify and mark unique bit
patterns in the waveform display. Once the unique bit patterns are
marked, they can be used as reference points or as criteria for a stop
measurement.
The markers are graphically accented in the display by dashed lines.
In addition, both markers are labeled at the bottom of the display in
the Display Location Reference Line.
When a marker is positioned in the waveform display, it is also
positioned in the chart display and data listing.
See Also
"Specify Patterns Field" later in this chapter for information on creating a
pattern for the X and O markers.
"Display Location Reference Line" later in this chapter.
14–13