Disk Drive Operations
How to Load a File
How to Load a File
The Load operation allows you to load prestored configuration files. Use this
operation when you want to quickly restore the analyzer to a configuration
used in a previous measurement or condition.
When configurations are stored to the disk, you are given the option to store
System only, Analyzer only, or All (System and Analyzer). So, when you load
a file into the analyzer, you are given the same options.
To load a file from the disk, perform the following steps:
Insert the source disk into the disk drive.
1
Select the Load disk operation.
2
When the Load selection is made, the analyzer reads the disk directory and
displays a list of all files on the disk.
Press the
keys to move the cursor to the file type field shown
3
arrow
below, then press the
File type field
File Type Parameter Field
6–8
Select
key.