The Waveform Menu
Trig to X / Trig to O Fields
Trig to X / Trig to O Fields
The Trig to X and Trig to O fields display the time between the trigger point
and the marker. They are also used to position the markers with reference to
the vertical dashed trigger line.
Marker position is set by first selecting the Trig to X and Trig to O fields, then
rotating the knob. In addition, values can be entered by highlighting the
field, then entering a value from the front-panel keypad.
X to O Field
In a State analyzer configuration, the X to O field is a "read only" field that
displays the difference between the X and O markers. As the X and O
markers are changed, the display changes accordingly.
In a Timing analyzer configuration, the X to O field can be set. If this field is
changed, both X and O markers will move simultaneously with the relative
difference remaining unchanged.
Trig to X field
X to O field
Trig to X / Trig to O Fields
14–27