Turn the knob to highlight the file type you want to load, then press
4
the
Select
key.
The System choice loads things like Bus and display configurations.
The Analyzer choice loads analyzer menus and measurement data.
Turn the knob and notice the changing filenames in the filename field
5
shown below, and how the cursor bar scrolls the list of available files.
Using the knob, scroll to the filename you want to load.
The two spaces(_ _) after the filename designates that this file is for the
system. One space and a letter (for example, "_A") after the filename
designates that the file is for the analyzer.
Filename Selection
Press the
arrow
keys to highlight the Execute field, then press the
6
key.
Select
The disk drive indicator light illuminates as the file is being loaded.
Disk Drive Operations
How to Load a File
Filename field
Scroll bar
6–9