Stop Measurement Field - Agilent Technologies 1660A Series User Reference

Stop Measurement Field

The stop measurement function allows you to specify a condition which stops
the analyzer measurement during a repetitive run. If two analyzers are
configured, both analyzers stop when either specified stop condition is
satisfied.
When the Stop measurement field is selected, a stop measurement type
menu appears. Depending on the analyzer configuration, you have the
choices of Off, X-O, and Compare.
Off
The Off selection turns all Stop measurement operations off.
If the stop measurement operation is not turned off and the stop
measurement criteria are met, the measurement will stop even though the
markers are set to other types or turned off.
Stop measurement
type field
Stop Measurement Field
Stop measurement type options
The Listing Menu
Stop Measurement Field
13–13