Table of Contents
Advertisement
The Format Menu
Label Assignment Fields
Turn Label Off
The Turn Label Off option turns off the label. When a label is turned off, the
label name and the bit assignments are saved by the logic analyzer. This gives
you the option of turning the label back on and still having the bit
assignments and name if you need them. With labels off, the label names
remain displayed for identification and searching purposes. With labels off,
memory can be saved if in transitional timing.
Modify Label
If you want to change the name of a label, or want to turn on a label and give
it a specific name, you would select the Modify label option. When selected, a
cursor appears under the first letter. Type in the new name, then press the
Done key. Label names can contain up to six characters.
Turn Label On
The Turn Label On selection is used to activate a label and its accompanying
bit assignment field. If a custom name is defined for the label, the name
remains with the label. If a custom name is not assigned, the default name
remain with the label. In addition, if no channels are turned on in the bit
assignment fields, the label is turned off when the Format menu is exited.
See Also
For information on how the Label Field modification works in other menus,
refer to "Label Field" in the Common Menu Fields chapter.
11–31
Advertisement
Table of Contents
