Table of Contents
Advertisement
Using the Front-Panel Interface
Front-Panel Controls
System Menu Key
The System key allows you to access the System
subset menus. The subset menus are the Disk, RS-232 / GPIB
(Printer/Controller for 1664A), Utilities, and Test menus.
Config Menu Key The Config menu key allows you to access either
the Timing or State Configuration menu. You exit the Config menu by
pressing another menu key.
Format Menu Key The Format menu key allows you to access either
the Timing or State Format menu. You exit the Format/Display menu by
pressing another menu key.
Trigger Menu Key The Trigger menu key allows you to access either
the Timing or State Trigger menu. You exit the Trigger menu by
pressing another menu key.
List Menu Key The List menu key allows you to access either the
Timing or State Listing menu. In addition, if the List key is pressed a
second time, the Compare menu becomes available. The available menus
depend on the type of analyzers turned on and what analyzer was
accessed last. You exit the List menu by pressing another menu key.
Waveform Menu Key The Waveform menu key allows you to access
either the Timing or State Waveform menu. In addition, if the Waveform
key is pressed a second time, the Chart menu becomes available. The
available menus depends on the type of analyzers turned on and what
analyzer was accessed last. You exit the Waveform menu by pressing
another menu key.
Select Key
The Select key initiates an interface action that is dictated by the field
currently highlighted. The highlighted field could be an option field within a
pop-up, a toggle field, an assignment field, or a Done field. For example, if
the field is a Done field, you just press the Select key to finish that task.
When option fields are selected, they either save the highlighted selection
into the configuration, or they access other pop-ups requiring another
selection or assignment. When you select an option, the pop-up either closes
automatically with the Select key or it closes when you select the Done field.
When toggle fields are selected, the field will automatically switch to the
other choice.
3–4
Advertisement
Table of Contents
