Agilent Technologies 1660A Series User Reference page 37

The Front-Panel Interface
This chapter explains how to use the front-panel user interface. The
front and rear-panel controls and connectors are explained in the first
part of this chapter followed by a series of "How to Use" examples.
The front-panel interface consists of front-panel keys, a knob, and a
display. The interface allows you to configure the instrument by
moving between menus and setting parameters within the menus.
The interface then displays the measurement results. In general,
using the front-panel interface involves the following processes:
•
Selecting the desired menu with the MENU keys.
•
Placing the cursor on the desired field by using the arrow keys and
by rotating the knob.
•
Selecting and displaying the field options or current data by
pressing the Select key.
•
If necessary, selecting lower level options or entering new data by
using the knob, arrow keys, or the keypad.
•
Starting and stopping data acquisition by using the Run and Stop
keys.
If you want to step through the examples on using the interface,
simply turn the power Off, then back On. Start with the section,
"How to Select Menus."
3–2