Table of Contents
Advertisement
GPIB Configuration (1660A through 1663A)
From the RS-232 / GPIB menu, perform the following steps to configure the
GPIB interface for printing:
Select the
1
When the pop-up appears, select "GPIB Connected to" field, and
2
toggle to the
Select the field to the right of "Printer" and when the pop-up appears,
3
select the printer that you're using (like, ThinkJet or QuietJet). If
you're using an Epson graphics printer or an Epson-compatible
printer, select
See Also
"RS-232 / GPIB Interface" chapter for more information on selecting the GPIB
Address to match the setup for the GPIB printer.
Select the "Print Width" field. The print width toggles between
4
132
80.
Print width tells the printer that you are sending up to 80 or 132 characters
per line (when you Print All) and is totally independent of the printer itself.
GPIB Configuration Menu (1660A through 1663A)
field.
GPIB
Printer
selection.
Alternate
.
. Select the width for your application or leave it at the default of
Connecting a Printer
GPIB Printers
and
80
5–5
Advertisement
Table of Contents
