Table of Contents
Advertisement
Key Features
Key features of the 1660A Series are listed below:
Analyzers
•
50-MHz (1664A) or 100-MHz state (1660A through 1663A), and 500-MHz
timing acquisition speed.
•
Variety of channel widths ranging from 34 channels with the 1664A, up to
136 channels with the 1660A.
•
Lightweight, passive probes for easy hookup and compatibility with
previous Agilent logic analyzers and preprocessors.
•
GPIB and RS-232C interfaces (1660A through 1663A) or Centronix
interface (1664A) for programming and hard copy printouts (GPIB and
RS-232C interfaces are optional on the 1664A).
•
Variable setup/hold time in the State analyzer.
•
External triggering to/from other instruments through rear-panel BNCs.
•
4 Kbytes-deep memory on all channels with 8 Kbytes-deep in half channel
modes.
•
Marker measurements.
•
Pre-configured trigger macros. 12 levels of trigger sequencing for state
and 10 levels of sequential triggering for Timing.
•
Both state and timing analyzers can use 10 pattern resource terms,
2 range terms, and 2 timer/counters to qualify and trigger on data. In
addition, the timing analyzer has 2 edge terms.
•
50-MHz (1664A) or 100-MHz (1660A through 1663A) time and
number-of-states tagging.
•
Full programmability.
•
State/State and mixed State/Timing displays.
•
Compare, Chart, and Waveform displays.
Introduction
Key Features
1–7
Advertisement
Table of Contents
