Table of Contents
Advertisement
Connecting a Printer
RS-232C Printers
See Also
"RS-232 / GPIB Interface" chapter for more information on selecting the baud
rate, stop bits, parity, and protocol to match the setup for the RS-232C
printer.
Select the "Print Width" field. The print width toggles between
4
132
80.
Print width tells the printer that you are sending up to 80 or 132 characters
per line (when you Print All) and is totally independent of the printer itself.
Touch the" Print Length" field and print length toggles between
5
12
. Select the length for your application or leave it at the default of
11
.
Print length tells the printer the page length for the type of paper you are
using.
Press the front-panel
6
5–12
. Select the width for your application or leave it at the default of
Done
key.
and
80
11
and
Advertisement
Table of Contents
