Table of Contents
Advertisement
Using the Front-Panel Interface
Rear-Panel Controls and Connectors
Intensity Control
Allows you to set the display brightness to a comfortable level.
Pod Cable Connectors
These are keyed connectors for connecting the pod cables. Depending on
the analyzer model, you will see a different number of pod cables.
RS-232C Connector
Standard DB-25 type connector for connecting an RS-232C printer or
controller. This interface is standard on the 1660A through 1663A, and
optional on the 1664A.
GPIB Connector
Standard GPIB connector for connecting an GPIB printer or controller. This
interface is standard on the 1660A through 1663A, and optional on the 1664A.
Parallel Printer Port Connector
Standard DB-25 type connector for connecting a Centronix printer to the
1664A. This interface is not available on the 1660A through 1663A.
Keyboard and Mouse Connector
Standard keyboard/mouse connector for connecting an optional keyboard
and/or mouse.
Fan
Provides cooling for the logic analyzer. Make sure air is not restricted from
the fan and rear-panel openings.
3–9
Advertisement
Table of Contents
