Connecting a Printer
RS-232C Printers
RS-232C Configuration (1660A through 1663A)
From the RS-232 / GPIB menu, perform the following steps to configure the
RS-232 interface for printing:
Select the
1
When the pop-up appears, select "RS-232 Connected to" field, and
2
toggle to the
Set the baud rate, stop bits, parity, and protocol to match the setup
3
for the RS-232C printer by selecting the appropriate fields.
Select the field to the right of "Printer" and when the pop-up appears,
4
select the printer that you're using (like, ThinkJet or QuietJet). If
you're using an Epson graphics printer or an Epson-compatible
printer, select
See Also
"RS-232 / GPIB Interface" chapter for more information.
RS-232 Configuration Menu (1660A through 1663A)
5–10
field.
RS-232
Printer
selection as shown below.
Alternate
.