Table of Contents
Advertisement
GPIB Printers
The logic analyzer interfaces directly with HP PCL printers supporting the
printer command language or with Epson printers supporting the Epson
standard command set. These printers must also support GPIB and Listen
Always. Printers currently available from Hewlett-Packard with these
features include:
•
•
•
•
•
It should be noted that an GPIB printer must always be in Listen mode, and
the analyzer's GPIB port does not respond to service requests (SRQ) when
controlling a printer. The SRQ enable setting for the GPIB printer has no
effect on 16600B printer operation.
GPIB Printer Setup
To set up the GPIB printer, perform the following steps:
Turn off the instrument and connect an GPIB cable from the printer
1
to the GPIB connector on the rear panel of the instrument. Turn on
the instrument.
GPIB Connector
(location different
for 1664A)
GPIB Connector
HP ThinkJet
HP LaserJet
HP PaintJet
HP DeskJet
HP QuietJet
Connecting a Printer
GPIB Printers
5–3
Advertisement
Table of Contents
