Table of Contents
Advertisement
Using the Logic Analyzer
Accessing the Menus
To access the System menus
The System menus allow you to perform operations that affect the
entire logic analyzer, such as load configurations, change colors, and
perform system diagnostics.
1 Select the mode field.
Use the arrow keys to highlight the mode field, then press the Select
key. Or, if you are using the mouse, click on the field. This operation is
referred to as "select."
A pop-up menu appears with the choices System and Analyzer. (If you
have installed any optional software, there may be other choices as
well.)
2 Select System.
3 Select the menu field.
The pop-up lists five menus: Hard Disk, Flexible Disk, External I/O,
Utilities, and Test.
52
Advertisement
Table of Contents
Troubleshooting
