Configuring The Ssh Client; Ssh Client Configuration Tasks; Configuring The Ssh Client Using An Ssh Client Software - 3Com WX3000 Series Operation Manual

Follow these steps to specify a source IP address/interface for the SSH server:
To do...
Enter system view
Specify a source IP address for
the SSH server
Specify a source interface for
the SSH server

Configuring the SSH Client

An SSH client software or SSH2-capable device can serve as an SSH client to access the SSH server.

SSH Client Configuration Tasks

Complete the following tasks to configure SSH client:
Configuring the SSH client

Configuring the SSH Client Using an SSH Client Software

A variety of SSH client software are available, such as PuTTY and OpenSSH. For an SSH client to
establish a connection with an SSH server, use the following commands:
Complete the following tasks to configure SSH client using a client software:
Generate a client key
Specify the IP address of the Server
Select a protocol for remote connection
Select an SSH version
Open an SSH connection with publickey
authentication
Open an SSH connection with password
authentication
Use the command...
system-view
ssh-server source-ip
ip-address
ssh-server source-interface
interface-type interface-number
Task
Using an SSH client software
On an SSH2-capable device
Task
1-12
—
Required
By default, the system
determines the IP address for
clients to access.
Required
By default, the system
determines the IP address for
clients to access.
Remarks
Required for publickey authentication;
unnecessary for password authentication
Required
Required
Required
Required for publickey authentication;
unnecessary for password authentication
Required for publickey authentication;
unnecessary for password authentication
Remarks
Remarks
Use either approach