Sensor Electronics SEC Millenium Series Instruction And Operation Manual page 351

MAIN MENU PAGE 2:
TOP MENU PAGE 2:
SEC DIAGNOSTICS MENU
SEC 3120 16-bit Modbus Manual
For Version 1.2 and above
FAULT RELAY SETTINGS MENU PAGE 1:
FAULT RELAY SETTINGS MENU PAGE 2:
RELAY PAGE 2:
RELAY LOGIC MODE MENU:
EXIT TOP RELAY CONFIGURATION MENU
NETWORK TOP MENU:
NETWORK ID MENU:
SELECT SENSOR-
CHANGE SENSOR NETWORK ID-
CHANGE SENSOR NETWORK ZONE ID-
EXIT NETWORK ID MENU
MODBUS NETWORK MENU:
MODBUS NETWORK MENU PAGE 1:
CHANGE DEVICE ONLINE-
CHANGE SENSOR ROLE-
CHANGE NETWORK ID MODE-
485 BUS SETTINGS MENU:
MODBUS NETWORK MENU PAGE 2:
EXIT MODBUS NETWORK MENU
EXIT NETWORK TOP MENU
HIDE LOW GAS MENU:
TOGGLE HIDE MODE ON/OFF-
EXIT GAS HIDE MENU
SELF TEST MENU:
SELECT SENSOR-
CANCEL SELF TEST MENU
ABORT OPERATING SENSOR SELF TEST
START SENSOR SELFT TEST
DATE AND TIME MENU:
CHANGE DATE:
CHANGE MONTH-
CHANGE DAY-
CHANGE YEAR-
EXIT CHANGE DATE
CHANGE TIME:
CHANGE HOURS-
CHANGE MINUTES-
CHANGE SECONDS-
EXIT CHANGE TIME
EXIT DATE AND TIME MENU
EXIT MAIN MENU
REBOOT SYSTEM
TOGGLE AND FLASH LEDS
TOGGLE RELAYS ON/OFF MENU:
MENU_DIAGNOSTICS_RLY_TOGGLE_t,
MENU_TOGGLE_LOW,
MENU_TOGGLE_MID,
MENU_TOGGLE_HI,
MENU_TOGGLE_FAULT,
Page 12 Of 46
December 2012
CHANGE FAULT LATCHING MODE-
CHANGE FAULT ON DELAY TIME-
CHANGE FAULT OFF DELAY TIME-
CHANGE FAULT COIL ENERGIZE MODE-
EXIT FAULT RELAY SETTINGS MENU
CHANGE RELAY LOGIC MODE-,
EXIT RELAY LOGIC MODE MENU
SELECT SEC DEFAULT SETTINGS
SELECT ALTERNATE SETTINGS
CUSTOM 485 LINE SETTINGS MENU:
CUSTOM 485 LINE SETTINGS PAGE 1:
CHANGE DATA BITS-
CHANGE STOP_BITS-
CHANGE PARITY MODE-
CHANGE BAUD RATE-
CUSTOM 485 LINE SETTINGS PAGE 2:
EXIT CUSTOM 485 SETTINGS MENU
EXIT 485 BUS SETTINGS MENU
Sensor Electronics Corporation
P/N 1580282, Rev. 1, 20121228