Sensor Electronics SEC Millenium Series Instruction And Operation Manual page 193

Relay Module Device Summary Screen- Device Name Touch Zone
When pressed, the screen transitions through the stop detection loop process as
illustrated in section 4.1, and then the Change Device Name screen appears:
T he current Device Name is displayed in the Device Nam
sim ply touch the current name in the text box and a keypad appears; typ
nam e and press the "Save Changes" button. As the name is written to the dev
confirmed, the status bar provides the progress messages. The "Abort" button may be
pressed to skip making the changes and return to normal operation. Once the name is
properly saved, it will be permanently saved in the device- you may press the "Main
Screen" button to return to normal operation.
Sensor Electronics Corporation
5500 Lincoln Drive
Minneapolis, Minnesota 55436
th
September 29 , 2006
Page 10 of 66
952-938-9486
e text box. To change it,
e in the new
ice and
SEC 3500 OI
Supervisor Operator's
Manual
Version 2.1.0095