Sensor Electronics SEC Millenium Series Instruction And Operation Manual page 180

accomplished, but does NOT permanently save the settings in memory until the email
notification activation button is pressed on the third setup screen.
C. Read Email List- This button reads a previously saved email list configuration from an
existing file ("EMLIST.CFG") located on the compact Flash card. Thus if the panel software is
updated and this information is lost, it can still be recovered and reactivated by first reading
the contents of the file back into the display fields. A Compact Flash card must be inserted
and mounted, as well as containing this file of the proper version. NOTE: Reading the
configuration from file does NOT permanently apply the settings in memory until the email
notification activation button is pressed on the third setup screen.
D. Next- When this button is pressed, the Test and Activate Screen is displayed. If the email List
Settings have been changed or have not been saved, a screen will popup requesting if the
user would like to save them before switching screens.
SEC 3500 Email Notification
Basic Setup and Configuration
Version 0.1 Draft
September, 2013
Page 13 of 16 Sensor Electronics Corporation
12730 Creek View Avenue
Savage, Minnesota 55378 USA
1-800-285-3651