Sensor Electronics SEC Millenium Series Instruction And Operation Manual page 181

3. Email Test And Activate Screen (screen three of three)
Screen Contents, From Top to Bottom:
Top Region: Screen Title, Project Title, Email Notification Functional Status.
The top region of this screen provides the same information and action as the Email Server Setup Screen
previously described.
Middle Region: Editable Test Contact Email Setup/Test Information Entry Fields
The following fields in the middle region of this screen allow the Panel Administrator to
configure the test email contact/list, select from one of the five contact groups to send a test email
to and press the "Send Test Email" button. Testing is not required to activate the email notification
system, and is usually performed AFTER the system has been activate at least ONCE before arriving
at this screen after the panel has been rebooted so that server settings have had a chance to take
effect. NOTE: A blank Test Group Contact will be ignored even if that contact group is chosen to
have a test email sent to, and the contact name must be four or more characters in length to be
SEC 3500 Email Notification
Basic Setup and Configuration
Version 0.1 Draft
September, 2013
Page 14 of 16 Sensor Electronics Corporation
12730 Creek View Avenue
Savage, Minnesota 55378 USA
1-800-285-3651