Sensor Electronics SEC Millenium Series Instruction And Operation Manual page 209

Shown above is the "Relay Latch Settings" screen for SEC 3100 device versions
under 2.1.0095 (less than feature level 6). As shown, the values can only by either "Yes"
or "No", changing the behavior of the relay latches to either "Latching On" or "Latching
Off"- normal mode. Whereas the previous screen shown is for SEC 3100 device version
2.1.0095+ (feature level 6+) having the Audible Alarm Latching feature support.
To commit the changes and write them to the SEC 3100, simply press the "Commit
Changes To 3100" button. A popup status box then appears, indicating the progress of
updatin g th e R elay Latch Mode settings in the 3100, as shown on the following page:
Sensor Electronics Corporation
5500 Lincoln Drive
Minneapolis, Minnesota 55436
th
September 29 , 2006
Page 26 of 66
952-938-9486
SEC 3500 OI
Supervisor Operator's
Manual
Version 2.1.0095