Intro - Sensor Electronics SEC Millenium Series Instruction And Operation Manual

Intro

The SEC 3500 Email Notification System is built on a foundation of built-in panel firmware
supported email capabilities. Email notifications can be configured to trigger on any combination of
alarm events, up to four sets of contacts with individual and unique trigger combinations. Email contacts
may be a single email address, or a distribution list name digested and broadcast by a sophisticated
email relay service or email gateway inbox rule-set: the target email relay server can be as simple as an
email in-box with inbound and outbound rules, or an advanced server. The server or relay service is the
customer's choice. All this is needed for the SEC 3500 is network access to the email server by Ethernet
IP address and domain name, with basic login authentication.
The server configuration parameters are established on the Email Notification Server Setup
Screen. The configuration will be saved to a file on the Compact Flash card (requires a Compact Flash
card), and can be restored from this file. Additionally, the configuration is permanently stored in internal
memory. The same is true for the email contact list and alarm triggers.
SEC 3500 Email Notification
Basic Setup and Configuration
Version 0.1 Draft
September, 2013
Page 3 of 16 Sensor Electronics Corporation
12730 Creek View Avenue
Savage, Minnesota 55378 USA
1-800-285-3651