Sensor Electronics SEC Millenium Series Instruction And Operation Manual page 249

8.3 .5.4 Auto Device Discovery- Supervisor Configuratio
As shown above, the Auto Discovery feature can be enable or disabled. By pressing
the button, it will toggle between "On" and "Off". This feature when enabled, allows the
HMI to automatically (in the background) periodically check for newly added devices to
the SEC Modbus. If it finds a new device it recognizes, it will popup a "loading
parameters" box and load all parameters from the d
and screens. By disabling the feature, devices are not automatically discovered- therefore
a new device added must be discovered manually using the Manual Device detection
screen as described in section 8.2.
Sensor Electronics Corporation
5500 Lincoln Drive
Minneapolis, Minnesota 55436
th
September 29 , 2006
evice and add it to the HMI database
Page 66 of 66
952-938-9486
n Item
SEC 3500 OI
Supervisor Operator's
Manual
Version 2.1.0095