Changing Relay Latch Mode Settings - Sensor Electronics SEC Millenium Series Instruction And Operation Manual

Popup status box displayed when committing the Relay Polarity Mode settings to the
SEC 3100 device.

6.2.4 Changing Relay Latch Mode Settings

P ressing the "Change Relay Latching Settings" button from the Navigation panel on
any of the Sensor configuration screens, as shown below:
Will display the "Relay Latch Settings" Screen as shown on the following page:
Sensor Electronics Corporation
5500 Lincoln Drive
Minneapolis, Minnesota 55436
th
September 29 , 2006
Page 24 of 66
952-938-9486
SEC 3500 OI
Supervisor Operator's
Manual
Version 2.1.0095