Changing The Alarm Threshold Levels - Sensor Electronics SEC Millenium Series Instruction And Operation Manual

6.2.1 Changing the Alarm Threshold Levels

The alarm threshold levels are changed in the above fields- just select the desired
threshold (low, mid or high) by touching on the
entering the new value using the popup keypad. You may continue to change other alarm
threshold levels as long as you remain on th
not yet comm itted and written to the SEC 3100 device. You may cancel the change
mer ely returning to the "Sensor Details" screen.
To commit the changes to the SEC 3100 device, press the "Commit Changes To
3100" button. A popup status box appears indicating that it is sending the parameters to
the SEC 3100 device, as shown below:
Sensor Electronics Corporation
5500 Lincoln Drive
Minneapolis, Minnesota 55436
th
September 29 , 2006
associated text field/current value, and
is screen; however these changed values are
Page 19 of 66
952-938-9486
s by
SEC 3500 OI
Supervisor Operator's
Manual
Version 2.1.0095