Sensor Electronics SEC Millenium Series Instruction And Operation Manual page 217

Refreshing SEC 3100 device parameters; Press the "Get Fresh Update" button:
The button changes to "Retrieving..." in yellow, while it is processing the request:
The "Abort ALL!" button may be pressed at anytime to cancel an operation so long
as it is still pending or processing. Even if you return to this screen at a later tim
different device, if this last request is still pending "Retriev
allow an ab ort. Once the process completes, all new parameters are pulled f
3100 device, fresh from the Sensor head all the way up through to the HMI panel data
base.
If necessary, you m
3100" button shown above:
This commands the SEC 3100 device to reset- thus causing it to voluntarily go
through a warm-reboot cycle. It may take a few minutes before it returns b
Sensor Electronics Corporation
5500 Lincoln Drive
Minneapolis, Minnesota 55436
th
September 29 , 2006
ay also reset a given SEC 3100 device, by pressing the "Reset
Page 34 of 66
952-938-9486
e with a
ing" it will show this and
rom the SEC
ack on-line.
SEC 3500 OI
Supervisor Operator's
Manual
Version 2.1.0095