5.4
The Security Screen- Login/Logout
1) The security system of the SEC 3500 OI Panel is established to maintain three levels
of increasing capability, configuration a
logged on. Which user category is logged in at any given tim
this
screen, and as well on the bottom of the primary operation screens, along with the
amount of time remaining until that user is automatically logged off. It is set for ten
minutes (600 seconds), and cannot be modified, or restarted by touch screen activity
(as contrasted by the screen saver and screen timeouts).
2) The basic operator category, which audience this manual is written for, does not have
to login to the panel. If a higher category user is logged in and is ready to leave the
panel, that user should go to this security screen and choose to "Log Off" to return the
SEC 3500 operational behavior and security settings to the basic operator category.
3) The two remaining operator categories, shown above, can be logged in by pressing on
their respective button, entering the user name and password as the popup keypad
entry displays appear. If all is entered properly, the user will show that it is logged on
above as well as a count down of the time remaining. See "Startup Basics Guide"
section 3.0 (1) and (2) previously for an example.
Sensor Electronics Corporation
5500 Lincoln Drive
Minneapolis, Minnesota 55436
th
July 28
, 2007
nd information. It is managed by what user is
Page 42 of 49
952-938-9486
e is displayed above on
SEC 3500 OI
Basic Operator's
Manual
Version 2.1.0095
Need help?
Do you have a question about the SEC Millenium Series and is the answer not in the manual?
Questions and answers