Sensor Electronics SEC Millenium Series Instruction And Operation Manual page 323

5) Q – When I press certain areas of the sc
Rights!!"- Why?
A – Because certain areas can launch configuration of such items however the user
logged in (or not if an operator) does not have the proper rights to perform that
function. Log in as the proper user and try it again.
6) Q – When a sensor drifts into an error, and I am viewing the Sensor Details screen,
it falls back to the Device Summary screen, even when I push on the summary
icon, it just keeps fallin
A – When a sensor has an error, which could be any number of things including the
transmitter (3100) communicating erratically or off-line, or even the sensor head
removed or calibrating, etc; The SEC 3500 does not trust that the details are
sound or correct, so it falls back and displays the specific and general error
conditions for that device. When that device returns to normal operation, it will
allow the sensor details to again be viewed.
7) Q – When the screen saver appears, does it continue to measure Gas and Status on
the Modbus Loop of all configured SEC 3100 Devices?
A – Yes. And if any device enters an alarm or fault condition, the global alarm/fault
status will be set accordingly and the screen saver will display both the global
alarm text and the global alarm icon for that alarm level and if alarms have not
been muted, the speaker will be sounding out the alarm.
Sensor Electronics Corporation
5500 Lincoln Drive
Minneapolis, Minnesota 55436
th
July 28 , 2007
reen, it displays "I
g back. Why can't I view these details?
Page 48 of 49
952-938-9486
nsufficient User
SEC 3500 OI
Basic Operator's
Manual
Version 2.1.0095