Deleting All Devices - Sensor Electronics SEC Millenium Series Instruction And Operation Manual

The above screen will be displayed (similar also for the Delete Relay Module),
though each of the m
you ma y either begin deletion of the device from the SEC 3500 OI database by pressing
the "Delete Now" button or abort the operation by simply pressing the "Go To Main
Screen" button to return operation to normal.
Once you press the "Delete Now" button, th
will app ear as appropriate to
will show the progress stage. Once it is complete and successful, it will reboot the SEC
3500 OI panel to commit the deletion permanently, and normal operation will be restored.
5.1

Deleting All Devices

If you desire to delete all devices from the SEC 3500 OI database, first remove all
devices from the Modbus network. You must be logged in as the Supervisor to perform
this operation. Navigate to the "Main Menu" (as shown on the next page):
Sensor Electronics Corporation
5500 Lincoln Drive
Minneapolis, Minnesota 55436
th
September 29 , 2006
essage labels above will not be visible at the same time, however
indicate the current action, and the status bar at the bottom
Page 13 of 66
952-938-9486
e various message labels shown above
Supervisor Operator's
SEC 3500 OI
Manual
Version 2.1.0095