Safe Power Off- Main Menu Item - Sensor Electronics SEC Millenium Series Instruction And Operation Manual

8.3.1 Safe Power Off- Main Menu Item

Perform this operation before removing power to the HMI to save configuration data
permanently. When you make sensor, relay module, or other HMI configuration changes,
they are not immediately committed to internal permanent storage. If you cannot afford to
lose the changes, then inte
from the HMI is best practice.
Once you press the big "POWER DOWN HMI NOW" button, the process begins:
Data is saved to permanent storage and then the HMI will automatically begin to
reboot into "Power Down" mode.
Sensor Electronics Corporation
5500 Lincoln Drive
Minneapolis, Minnesota 55436
th
September 29 , 2006
ntionally performing this operation before removing power
Page 52 of 66
952-938-9486
SEC 3500 OI
Supervisor Operator's
Manual
Version 2.1.0095