Restarting The Sec 3500 Hmi - Sensor Electronics SEC Millenium Series Instruction And Operation Manual

5.5.3 Restarting the SEC 3500 HMI

When Re set HMI is selected from the Screen Selection Menu or from another
action on a configuration screen, this display box will popup, and in this case, will allow
the operator to choose to Abort/Stop before starting, or if truly desiring to restart the HMI,
then by pressing "OK", it will then permanently save all data (the popup display will
change to the diagram below) to NVRAM and restart the HMI:
T he SEC 3500 panel will then reboot, the splash screen will appear, and the Main Zone
S ummary screen will be displayed and normal operation resumed.
Page 46 of 49
Sensor Electronics Corporation SEC 3500 OI
5500 Lincoln Drive Basic Operator's
Minneapolis, Minnesota 55436 Manual
th
July 28 , 2007 952-938-9486 Version 2.1.0095