Sensor Electronics SEC Millenium Series Instruction And Operation Manual page 189

By touching either the zone or device ID labels at the top left corner of
summary or details screen, the change process can begin. You must be logged in as the
Supervisor first. It does not matter if this is a SEC 3100 device or a Relay Module- the
same touch zones and labels launch the ID Change screen and process. Shown above is a
SEC 3100 device summary screen. Below is a SEC Relay Module Summary Screen:
As well as the device detail screens for both device types, shown on the following
page:
Sensor Electronics Corporation
5500 Lincoln Drive
Minneapolis, Minnesota 55436
th
September 29 , 2006
Page 6 of 66
952-938-9486
any device
SEC 3500 OI
Supervisor Operator's
Manual
Version 2.1.0095