Sec 3100 Configuration - Sensor Electronics SEC Millenium Series Instruction And Operation Manual

The operation m ay be deleted by pressing the "Go To Main Screen" bu
pressing any other button. Otherwise, press the "Delete Now"
process. As devices are deleted from the SEC 3500 OI database, the status label indicates
the progress. Once it is complete, it will reboot the OI and then return to norm
6.0

SEC 3100 Configuration

The SEC 3500 OI Panel/HMI contains all of
every parameter for any SEC 3100 Digital Gas Transmitter/SEC 3000 Sensor that is
possible at the unit itself, as well as performing full calibration functions for the Sensor.
The configuration screens are accessed from the Sensor Detail Screen discussed in the
Basic Operator's Manual, as show below, and allows entry into the configuration screens
from the touch label areas shown below if the Supervisor is logged in:
All of these touch labels/buttons will transport you to the associated SEC 3100
configuration/control screen if you are logged in as the Supervisor.
Sensor Electronics Corporation
5500 Lincoln Drive
Minneapolis, Minnesota 55436
th
September 29 , 2006
the screens necessary for configuring
Page 15 of 66
952-938-9486
tton before
button to begin the deletion
al operation.
SEC 3500 OI
Supervisor Operator's
Manual
Version 2.1.0095