Setting A Global Alarm Latch Type - Sensor Electronics SEC Millenium Series Instruction And Operation Manual

7.0 Setting a Global Alarm Latch
Setting a Global Alarm
other type of SEC 3500 OI Relay Module coil configuration. First follow the directions
shown in section 6.0 previously for establishing the source, establish the triggers and coil
polarity, then change the coil latch type to "Audible":
This of course is do
button is pressed to save
review/coil assignments screen depicting the settings and warning that the changes have
not yet been permanently committed to firmware (shown on the next page).
Sensor Electronics Corporation
5500 Lincoln Drive
Minneapolis, Minnesota 55436
th
May 13 , 2007
Latch type is identical in function and form to s
ne while logged in as the "Supervisor", and then the "Try"
the settings, then the "Close" button, resulting in the coil
Page 25 of 26
952-938-9486
Type
Startup Basics
Version 2.1.0090
etting any
SEC 3500 OI
Manual