Table of Contents
Advertisement
Basic User Operations
6. Open one of the build chamber doors, and add resin to the vat. A beep sounds indicating
when enough resin has been added.
7. Close the build chamber door, and select OK on the dialog box.
8. The build continues. The Status and Action sections indicates current build status and
activity. The part layer window shows the current build layer.
9. Use the arrow keys and slider to see future build layers. This section reverts to the current
build layer when the next layer starts.
Pausing the Build
The current build can be paused at any time by pressing the Pause button.
If one part is failing in a multiple part build, it may be removed without affecting the rest of the
build. To do this:
1. First pause the build and accept the Pause dialog box.
2. Next, select the Edit tab and select the part that will be deleted.
3. Once selected, the corresponding part will highlight in the layer preview window.
Figure 19: Status and Action sections
© Copyright 2022 Stratasys. All rights reserved.
Starting a Build
Page 149
Advertisement
Table of Contents
