Led Settings Of Grip Switch - Mitsubishi Electric GOT2000 Series Hardware User Manual

LED settings of grip switch

Grip switches (DSW1, DSW2) contain green LED for checking operation.
The grip switch LED coordinates with b6 of the external input and output function/output information (read device +1) and
operates the LED ON/OFF display.
Allocation of device to control LED
The device to control LED is allocated by the drawing software.
The external input and output function/output information (read device +1) set in [read device] of [system information function]
in the [common settings] is allocated to the LED control.
The LED control for the grip switch is allocated to b6 (7th bit from the lower) of the device allocated to the external input and
output function/output information.
The LED is lit when the bit value is 1 and notlit when the bit value is 0.
External input and output function/output information (read device +1)
b15 b14 b13 b12
For example, when D100 is set in the read device of system information, the value in b6 of D101 is reflected to the LED lit/not
lit.
b11 b10 b9 b8 b7 b6 b5 b4
Grip switch
9 HANDY GOT POWER WIRING AND SWITCH HANDLING
b3 b2 b1 b0
353
9.4 Switch Wiring
9