Installing The Battery To Gt2715, Gt2712, Gt2710, Gt2512, Gt2510-V, Or Gt2510F - Mitsubishi Electric GOT2000 Series Hardware User Manual

Installing the battery to GT2715, GT2712, GT2710, GT2512,
GT2510-V, or GT2510F
The following shows the battery installation procedure, taking GT2712 as an example.
1.
Make sure that the GOT power is off.
2.
Install the battery to the GOT rear face.
Open the battery cover as shown below.
Battery cover
3.
To replace the battery, remove the old battery, and then disconnect the connector.
For information on how to remove the battery, refer to the following.
Page 237 Removing the Battery
4.
The GOT-side connector depends on whether the GOT has a battery extension cable.
Without a battery extension cable
Insert the battery connector to the GOT connector.
With a battery extension cable
Insert the battery connector to the battery extension cable connector of the GOT.
Battery cover
Black cable
Battery Connector
Without a battery extension cable
The GT27 models with the following hardware versions have no battery extension cable.
GT2715: Version G or later (manufactured in September 2014)
GT2712: Version M or later (manufactured in September 2014)
GT2710: Version Nor later (manufactured in September 2014)
The GT25 models have no battery extension cable regardless of the hardware version.
For how to check the hardware version, refer to the following.
Page 427 Confirming of Versions and Conforming Standards
Battery extension cable
Black cable
Red cable
Red cable
Battery
With a battery extension cable
Battery cover
Black cable
Red cable
Connector
6 INSTALLATION AND REMOVAL
227
6.10 Installing the Battery
6