Connector Specifications; Installing And Removing Of External Cable - Mitsubishi Electric GOT2000 Series Hardware User Manual
Graphic operation terminal
Hide thumbs
Also See for GOT2000 Series:
- Connection manual (1224 pages) ,
- User manual (654 pages) ,
- Basic training textbook (255 pages)
Table of Contents
Advertisement
Connector specifications
Connector for GT11H-C □ □ □ -37P
The following connector is used as the connector for the relay cable of the external cable (GT11H-C □ □ □ -37P).
For the connector to be connected to GT11H-C □ □ □ -37P and its cover, use products applicable to the GT11HC.
Connector model
17JE-23370-02(D8A2)-CG
Controller side connector
Use the connector compatible with the controller.
For details, refer to the manual of the controller to be used.
Installing and removing of external cable
Installation procedure of external cable (GT2506HS-V)
1.
Make sure that the GOT power is off.
2.
Insert the connector adjusting the triangle marks of the main unit side connector and cable side connector.
3.
After inserting the connector, push the lock lever.
The connecters are locked after the lever is pushed into.
Connector type
D-sub 37-pin (male)
M2.6 screw fixed type
7 OPTION AND COMMUNICATION CABLE FOR HANDY GOT
Manufacturer
DDK Ltd.
7.5 External Cable, Relay Cable
7
313
Advertisement
Table of Contents
Troubleshooting
