5.5 Touch switch settings
5.5.1
Bit switch settings
Make the settings for the switches which behave as follows when touched.
• Bit Switch
• Go To Screen Switch : Switches base screen/window screen when touched.
Creating a touch switch which turns the bit device (M10) ON when touched.
(1) Place a touch switch.
: Turns bit device ON/OFF when touched.
Bit switch
Turns N10 ON.
Bit switch
Turns N10 OFF.
Bit switch
Turns N30 ON.
Screen switching switch
Switches to Base Screen No. 2.
Screen switching switch
Displays Window Screen No. 1.
1)
Click on the [Object] - [Switch] - [Bit Switch]
menu.
2)
Move the cursor to the position where the
touch switch is placed, and click the mouse
button.
3)
The touch switch is placed.
4)
Click the right mouse button in the area other
than the touch switch to cancel the placement
mode (+) of the cursor.
5)
Double-click the placed touch switch.
5 - 27
Screen
Screen
No. 1
No. 2
Window
No. 1