Mitsubishi Electric GOT2000 Series Hardware User Manual page 304
Graphic operation terminal
Hide thumbs
Also See for GOT2000 Series:
- Connection manual (1224 pages) ,
- User manual (654 pages) ,
- Basic training textbook (255 pages)
Table of Contents
Advertisement
■Attaching the wall-mounting attachment on the panel surface
Fit the wall-mounting attachment on the panel front face, and fix it with M4 screws and nuts (which are packed together).
Holes of Φ4.5 are drilled for mounting the wall-mounting attachment
Tighten the screws within the specified torque range (0.69 N•m to 0.88 N•m).
Overtightening the screws may cause damage.
Make sure that interfering objects are not present in the downward direction so that connection of the external connection
cable will not be hindered.
When opening and closing the environment-resistant interface cover (for using the USB/SD card connector located inside the
cover) while the handy GOT is attached, make sure that interfering objects are not present in the upward direction.
7 OPTION AND COMMUNICATION CABLE FOR HANDY GOT
302
7.3 Wall-mounting attachment
Advertisement
Table of Contents
Troubleshooting
